|
Understand Chromatography Techniques and DifferencesChromatography is a technique that separates a mixed sample into its individual components. Chromatographic techniques were originally used to separate and recover (separate and purify) the components of a sample. Today's sophisticated chromatographic techniques are commonly used to separate and quantify sample components. The term chromatography was invented by the Russian botanist Tswett. Tswett described the following phenomenon: When petroleum ether and a plant extract were passed through a cylindrical glass tube filled with calcium carbonate powder, several pigments were separated. Tswett named this analysis method "Chromatographie". Chromatographie is a combination of chroma and graphos. In Greek, these two words mean "color" and "painting" respectively. "Chromatography" refers to a separation technique, while "liquid chromatography" refers to a system that performs chromatographic analysis. The plot of signal intensity as a function of time that is available as a result of the separation is called a "chromatogram". As shown in the table below, chromatography methods usually include gas chromatography and liquid chromatography. They are classification methods named based on the different separation principles of components between the mobile phase and the stationary phase. Although gas chromatography and liquid chromatography have the same purpose (such as separation and quantification), the detection objects are also different due to different separation conditions of the samples. The stationary phase usually refers to the chromatography column (packing material), while the mobile phase usually refers to the vehicle loaded into the column with the sample, and in liquid chromatography the mobile phase refers to the eluent. How are sample components separated within the column? The speed at which a sample component moves depends on its affinity for the stationary or mobile phase. This affinity has various effects: such as absorption, distribution, ion exchange, etc. The components have a higher affinity to the mobile phase and move faster than the stationary phase. Components with a higher affinity for the stationary phase elute from the column later. The order and resolution in which the various components emerge from the column depend on the type of stationary and mobile phases chosen. |